+3MS Paraglider Riser Mount Compass LITE (Orange) 1.png
+3MS Paraglider Riser Mount Compass LITE (Orange) 2.png
+3MS Paraglider Riser Mount Compass LITE (Orange) 4.png
+3MS Paraglider Riser Mount Compass LITE (Orange) 3.png
+3MS Paraglider Riser Mount Compass LITE (Orange) 5.png
+3MS Paraglider Riser Mount Compass LITE (Orange) 1.png
+3MS Paraglider Riser Mount Compass LITE (Orange) 2.png
+3MS Paraglider Riser Mount Compass LITE (Orange) 4.png
+3MS Paraglider Riser Mount Compass LITE (Orange) 3.png
+3MS Paraglider Riser Mount Compass LITE (Orange) 5.png

Paraglider Riser Mount Compass LITE

$40.00
6 available

Same heading. Less weight.

The Riser Mount Compass LITE strips the original design down to the essentials, dropping the weight from 15.7 grams to just 11.2 grams while retaining all the strength needed for its intended use.

The housing is printed in translucent orange PETG, giving it a distinctive look inspired by the transparent-tech aesthetic of the late ’90s and early 2000s - think translucent iMacs, Game Boys, and Nintendo 64s.

LITE eliminates all metal hardware. Instead, the threads are integrated directly into the housing and use a lightweight plastic set screw to secure the compass to your riser. Two set screws are included: a low-profile version tightened with the included 3mm Allen key, and a finger-adjustable thumb screw for completely tool-free installation.

Fits 15mm wide risers with a thickness of 1–6mm, allowing it to mount on thick or thin sections of webbing without disconnecting your wing.

• 11.2 grams, 29% lighter than the original
• No metal components
• Translucent orange PETG construction
• Fits 15mm wide risers, 1–6mm thick
• Direct-read heading
• Compact, low-profile design
• Analog - no batteries or electronics
• No permanent riser modification

Note: This compass is intended as a supplemental reference only and should not be relied upon as a primary navigation instrument. It is the pilot’s responsibility to choose a safe mounting location and ensure the compass does not interfere with risers, lines, controls, or other equipment. Always use your own judgment when installing and flying with any accessory.

Housing designed, 3D printed, and assembled in Santa Rosa, California. Compass unit sourced from Taiwan.

Shipping Rates
• $8 flat-rate U.S. shipping
• $16 flat-rate Canada shipping
• $20 flat-rate International shipping
• International customers are responsible for any customs duties, import taxes, VAT, or other fees charged by their country upon delivery.

Flying with friends? Buy two, three, or more for the same flat shipping rate. They also make a great gift for your paraglider friends!

Same heading. Less weight.

The Riser Mount Compass LITE strips the original design down to the essentials, dropping the weight from 15.7 grams to just 11.2 grams while retaining all the strength needed for its intended use.

The housing is printed in translucent orange PETG, giving it a distinctive look inspired by the transparent-tech aesthetic of the late ’90s and early 2000s - think translucent iMacs, Game Boys, and Nintendo 64s.

LITE eliminates all metal hardware. Instead, the threads are integrated directly into the housing and use a lightweight plastic set screw to secure the compass to your riser. Two set screws are included: a low-profile version tightened with the included 3mm Allen key, and a finger-adjustable thumb screw for completely tool-free installation.

Fits 15mm wide risers with a thickness of 1–6mm, allowing it to mount on thick or thin sections of webbing without disconnecting your wing.

• 11.2 grams, 29% lighter than the original
• No metal components
• Translucent orange PETG construction
• Fits 15mm wide risers, 1–6mm thick
• Direct-read heading
• Compact, low-profile design
• Analog - no batteries or electronics
• No permanent riser modification

Note: This compass is intended as a supplemental reference only and should not be relied upon as a primary navigation instrument. It is the pilot’s responsibility to choose a safe mounting location and ensure the compass does not interfere with risers, lines, controls, or other equipment. Always use your own judgment when installing and flying with any accessory.

Housing designed, 3D printed, and assembled in Santa Rosa, California. Compass unit sourced from Taiwan.

Shipping Rates
• $8 flat-rate U.S. shipping
• $16 flat-rate Canada shipping
• $20 flat-rate International shipping
• International customers are responsible for any customs duties, import taxes, VAT, or other fees charged by their country upon delivery.

Flying with friends? Buy two, three, or more for the same flat shipping rate. They also make a great gift for your paraglider friends!

Mounts in Seconds

Designed for 15mm wide risers, the +3M/S Riser Mount Compass accommodates webbing thicknesses ranging from 1 to 6mm, fitting everything from thicker lower riser webbing to thin brake pulley webbing.

It installs in seconds without disconnecting your wing and locks firmly in place with a sliding lock and adjustable nylon-tipped set-screw.

Download PDF Instructions

Paraglider compass installation step 1
Paraglider compass installation step 2
Paraglider compass installation step 2

Frequently Asked Questions

  • The compass is designed for 15mm wide riser webbing, 1 to 6mm thick. That covers most main riser webbing and many brake pulley sections. If you're unsure of your riser width, we strongly recommend measuring with calipers before ordering.

  • No. It installs directly onto the webbing in seconds using the sliding lock and adjustable set-screw with the included hex key tool.

  • No. The set-screw has a nylon (not metal) tip, so it won't cut or fray riser webbing. Its only job is to prevent the compass from sliding along the webbing, so you don't need to tighten it firmly, just enough to hold it in place.

  • No. It's a fully analog magnetic compass with no batteries, electronics, or charging.

  • It's direct-read: the letter facing you is the heading you're currently flying. No mental flipping or mirroring required.

  • Under 15 grams, lighter than most keychains.

  • 3D-printed PETG, a durable plastic chosen for its strength, impact resistance, and ability to hold up to sun exposure and temperature swings.

  • 3D printed parts have a slightly different finish than something that comes out of a mold. You’ll see visible layer lines or small surface imperfections, but that’s normal and doesn’t affect strength or function.

    Each housing is printed in durable PETG, then hand-finished, assembled, tested, and packaged by me. The result is a lightweight, extremely strong, high-quality part that’s packed with features and built for real-world use.

  • The compass unit, hex key tool, draw-string storage pouch, and a +3M/S sticker.

  • If it doesn't fit, return within 30 days in unused condition for a refund.

  • Absolutely. If you have a friend or family member who flies, the Riser Mount Compass makes a small, practical gift they can actually use in the air. 15mm riser webbing is very common on modern paragliders, but if you’re unsure, it’s worth checking their gear first to make sure it will fit.

  • I design, 3D print, and assemble each compass in my home office in Northern California.

    The 360° globe compass itself is sourced from Taiwan.

  • Yes, we ship to most countries.

    USA: $8
    Canada: $16
    Rest of World: $20

    International customers are responsible for any customs duties, import taxes, VAT, or other fees charged by their country. These fees are not included in the product or shipping price and may be collected upon delivery.

    International delivery times vary by destination/customs.

Shop Now