A navigation compass attached to a safety harness is visible in the foreground during a paragliding flight over the coastline.

Analog. Reliable. Secure.

Ultra-compact compass designed to lock in place on thick or thin sections of your paraglider riser.

Line graph with the y-axis labeled 'Profit' and the x-axis labeled 'Time'. An orange arrow curves upward indicating increasing profit over time.

Riser Mount Compass

A black and orange digital device with a dome-shaped top featuring a compass marked with North, South, East, and West, and a smaller grid pattern at the center. The device has a textured black base with orange accents and an orange arrow on the side.

$40 USD

Never be without your heading.

Whether you're sucked into the white room or simply staying on track, this analog compass tells you exactly where you're pointed the moment you glance at it.

Fits 15mm wide risers with a thickness of 1-6mm, so you can mount it on thick or thin sections of webbing. Secured by a sliding lock and a chamfered-edge nylon-tipped set-screw, it installs in seconds without disconnecting your wing.

Made from durable PETG, chosen for its impact resistance and ability to hold up to sun and temperature swings.

• Fits 15mm wide risers, 1-6mm thick
• Adjustable nylon-tipped set-screw
• Direct-read heading
• Analog, no batteries or electronics
• Durable PETG construction
• Lightweight, under 15 grams

Paraglider Riser Mount Compass

$40.00

Never be without your heading.

Whether you're sucked into the white room or simply staying on track, this analog compass tells you exactly where you're pointed the moment you glance at it.

Fits 15mm wide risers with a thickness of 1-6mm, so you can mount it on thick or thin sections of webbing. Secured by a sliding lock and a chamfered-edge nylon-tipped set-screw, it installs in seconds without disconnecting your wing.

Made from durable PETG, chosen for its impact resistance and ability to hold up to sun and temperature swings.

• Fits 15mm wide risers, 1-6mm thick
• Adjustable nylon-tipped set-screw
• Direct-read heading
• Analog, no batteries or electronics
• Durable PETG construction
• Lightweight, under 15 grams

Compass unit sourced from Taiwan. Housing designed and 3D printed in California.

A black and gray digital compass with orange arrow, mounted in a black protective case.

Close-up of tools and parts, including a black compass-like device with a yellow arrow indicating north, a black plastic component, a white button, and a small metal spring.

Close-up of a black, rectangular laser sensor with a yellow adjustment knob and a visible laser beam emitted from the front.

Mounts in Seconds

Designed for 15mm wide risers, the +3M/S Riser Mount Compass accommodates webbing thicknesses ranging from 1 to 6mm, fitting everything from thicker lower riser webbing to thin brake pulley webbing.

It installs in seconds without disconnecting your wing and locks firmly in place with a sliding lock and adjustable chamfered-edge nylon-tipped set-screw.

Direct-Read Heading
Instantly see your direction. “S” means you are flying south.

A black silhouette of a house with trees and a car, set against a light background.

Securely Mounted
Slide lock and adjustable set-screw keep the compass firmly in place.

A cartoon black cat sitting on a crescent moon with stars in the background.

Built for the Elements
Tough PETG, built to handle sun, cold, and rough handling.

A person sitting at a desk with a computer monitor, keyboard, and mouse, in a well-lit office space.

Light & Low Profile
Minimal drag, only 15 grams, and designed to be out of the way.

Close-up of an orange and black climbing harness with a black carabiner, a compass, and red climbing rope attached to it, on a green background.

Close-up of a bluish-black compass attached to a black strap, hanging from a hook on a wooden structure with a blurred outdoor background.

A close-up of a black compass attached to a strap, hanging from a piece of equipment or gear outdoors with blurred green background.

A person paragliding over rolling hills and a town with water in the background at sunset.

Tiny & Light

Line drawing of a small, vintage-style film projector with a handle on the side, depicted in black and white.

Weighing under 15 grams, the compact form factor all but disappears into your setup, until the moment you need it.

Frequently Asked Questions

The compass is designed for 15mm wide riser webbing, 1 to 6mm thick. That covers most main riser webbing and many brake pulley sections. If you're unsure of your riser width, we strongly recommend measuring with calipers before ordering.
No. It installs directly onto the webbing in seconds using the sliding lock and adjustable set-screw with the included hex key tool.
No. The set-screw has a nylon (not metal) tip with hand-chamfered edges, so it won't cut or fray riser webbing. Its only job is to prevent the compass from sliding along the webbing, so you don't need to tighten it firmly, just enough to hold it in place.
Depending on the webbing thickness and placement, the set screw may not be necessary and can be removed entirely.
No. It's a fully analog magnetic compass with no batteries, electronics, or charging.
It's direct-read: the letter facing you is the heading you're currently flying. No mental flipping or mirroring required.
Under 15 grams, lighter than most keychains.
3D-printed PETG, a durable plastic chosen for its impact resistance and ability to hold up to sun exposure and temperature swings.
The compass unit, hex key tool, draw-string storage pouch, and a +3M/S sticker.
If it doesn't fit, return within 30 days in unused condition for a refund.
Not currently. We only ship within the US.